Moderate temperature sintering of BaZr0.8Y0.2O3-δ protonic ceramics by A novel cold sintering pretreatment

The state-of-the-art protonic ceramic conductor BaZr_0.8Y_0.2O_3-δ (BZY20) requires an extremely high sintering temperature (≥1700 °C) to achieve the desired relative density and microstructure necessary to function as a proton conducting electrolyte. In this work, we developed a cold sintering pretreatment assisted moderate-temperature sintering method for the fabrication of high-quality pure BZY20 pellets. BZY20 pellets with high relative density of ~94% were fabricated with a final sintering temperature of 1500 °C (200 °C lower than the traditional sintering temperature). A comparison with BZY20 control samples indicated that the proper amount of BaCO₃ introduced on the BZY20 particle surface and the high green density achieved by cold sintering pretreatment were the main drivers for lowering the sintering temperature. The electrical conductivity measurement by electrochemical impedance spectroscopy showed that the as-prepared BZY20 pellets have a proton conductivity comparable to the state-of-the-art values. The cold sintering pretreatment outlined in this work has the potential to lower the sintering temperatures for similar types of protonic ceramic materials under consideration for a wide range of energy conversion and storage applications.     

基于可穿戴传感器数据的人体行为识别数据特征提取方法

随着可穿戴设备的发展与普及,基于可穿戴传感数据进行人体行为检测展现了巨大的研究价值.目前大多人类行为识别工作都是基于视频图像展开的,然而,使用计算机视觉技术进行人类行为识别存在2个挑战:一是很难使参与数据采集的人员在自然状态下采集真实状态下的运动数据,在开展数据采集之前往往需要对参与数据采集的人员进行培训并严格规范其采集动作,最终得到的数据将是背离真实生活的数据,其研究价值将大打折扣;二是数据采集过程中还涉及采集人员的隐私保护问题.为此,提出一种基于深度学习的数据特征提取方法.首先在灵活设置卷积核的基础上引入神经网络的分支结构多尺度提取原始数据的深度特征;然后将各分支得到的数据特征进行融合并作为下一个卷积层的输入.实验结果表明,与目前主流方法相比,该方法在MHEALTH,WHARF和USCHAD这3个标准数据集上的准确率和召回率都取得了更好的效果.此外,该方法还在2个较新数据集Stanford-ECM Dataset和DATAEGO上做了验证,结果表明该方法具有较好的泛化能力.     

基于面元素重排的三维网格模型数据隐藏算法

目的 为了解决目前三维数据隐藏算法不能兼顾无失真和盲提取的问题，提出一种新的完全无失真的三维网格模型数据隐藏盲算法。方法 首先使用混沌逻辑映射选择嵌入与提取模式，保证数据的安全性。然后利用面元素重排，完全不会造成三维模型失真的性质，通过不同嵌入模式规则对三角面元素进行重排，以嵌入秘密数据。接收端则可根据相应的提取模式规则提取秘密数据。结果 仿真结果与分析表明，该算法不会对三维模型造成任何失真，嵌入容量为每顶点2比特，且能抵抗仿射变换攻击、噪声攻击和平滑攻击等。结论 这种三维数据隐藏盲算法无失真，容量大、安全性高、鲁棒性强，适用于三维载体不容修改的情形，如军事、医学、秘密通信和版权保护等。     

特低渗砂岩油藏CO2-低界面张力黏弹流体协同驱油机理研究

目的特低渗油藏储层物性差、层间非均质性强,造成CO₂驱易发生气窜,提高采收率效果欠佳,其中,CO₂水气交替驱作为结合CO₂驱和水驱优势的方法,具有较高的适用性。为进一步改善CO₂-水交替驱的开发效果,开展了CO₂-低界面张力黏弹流体协同驱油研究。 方法通过界面张力和润湿性能测试评价低界面张力黏弹流体基本性能,并利用微观可视化驱油实验及岩心驱油实验等,探究了不同驱替方式的驱油效果和CO₂-低界面张力黏弹流体协同驱油过程中二者之间的“协同作用”机理。 结果低界面张力黏弹流体具备良好的界面活性和改变岩石表面润湿性能力,水驱后开展CO₂驱、低界面张力黏弹流体驱、CO₂-低界面张力黏弹流体交替协同驱,采收率可在水驱基础上分别提高0.91%、10.66%、16.25%,其提高采收率机理包括降低界面张力、改善流度比、改变岩石表面润湿性及乳化作用的协同效应等。 结论CO₂-低界面张力黏弹流体协同驱既可有效增强非均质特低渗砂岩油藏注CO₂过程中气体流动性控制,又能够降低CO₂萃取轻烃导致重质组分沉积的影响,具有协同增效作用。      

Oxidative characteristics and gel properties of porcine myofibrillar proteins affected by l-lysine and l-histidine in a dose-dependent manner at a low and high salt concentration

This study investigated the effects of l -lysine (Lys) and l -histidine (His) on the oxidative characteristics and gel properties of porcine myofibrillar proteins (MP). Results showed that Lys and His had a strong ferrous ion-chelating ability and hydroxyl radical-scavenging activity. Moreover, Lys and His inhibited the protein carbonyl formation and MP aggregation at 0.2 M and 0.6 M NaCl, respectively, in a dose-dependent manner. Furthermore, 2 and 4 mg mL⁻¹ Lys and His decreased the oxidation-induced loss of the tertiary structure of MP accompanied by the lower surface hydrophobicity. The water-holding capacity and gel strength of MP gels increased with increasing Lys and His concentrations due to more regular and lamellar structures with smaller and homogeneous pores at 0.6 M NaCl and more orderly crosslinking via fibrous filament at 0.2 M NaCl. In summary, Lys and His chelated the ferrous ions and scavenged hydroxyl radicals, decreased the oxidation-induced physicochemical changes, thus preventing oxidative damage during the formation of a three-dimensional gel network, which resulted in better gel quality.     

Fabrication of high-efficiency Yb:Y2O3 laser ceramics without photodarkening

High-efficiency Yb:Y₂O₃ laser ceramics were fabricated using the vacuum-sintering plus hot isostatic pressing (HIP) without sintering additives. High-purity well-dispersed nanocrystalline Yb:Y₂O₃ powder was synthesized using a modified co-precipitation method in-house. The green bodies were first vacuum sintered at a temperature as low as 1430°C and then HIPed at 1450°C. Finally, the samples were air annealed at 800°C for 10 h. Although no sintering aids were used, full density of the samples with excellent optical homogeneity and an inline transmission of 80% at 400 nm could be obtained. Moreover, photodarkening phenomenon was not detected in the ceramics. Preliminary laser experiment with the fabricated ceramics in a two-mirror cavity has demonstrated 32 W continuous-wave (CW) output at ∼1077 nm with an optical-to-optical conversion efficiency of 58.2%. To the best of our knowledge, this is so far the highest CW output power and optical-to-optical conversion efficiency achieved with the Yb³⁺-doped sesquioxide ceramics in a simple two-mirror cavity.     

Metal modified (Ni,Ce, Ta) Ti/SnO2–Sb2O5–RuO2 electrodes for enhanced electrochemical degradation of Orange G

Journal of Applied Electrochemistry - Ni, Ce, and Ta modified Ti/SnO2–Sb2O5–RuO2 anodes were first prepared by thermal decomposition strategy and applied for Orange G degradation to...